Conventional User-Friendly Evacuation Fire Alarm Control Panel System

Basic Info

Model NO.	AW-CFP2166-8
Transmission Mode	Cable
Alarm Volume (within 1m)	≥110dB
Receive Frequency	433.92MHz
Optional Zones	1-32
Power Supply	240VAC
Backup Lead-Acid Battery	24VDC
Optional Housing Color	Red/Grey/White/Black
Fault Alert	LED Indicator
Alarm Notifier	LCD Display
Zone′s Capacity	Maximumly Supports 20PCS
Warranty	12months
Supply Type	R&D Manufacturer
OEM & ODM Service	Available
Transport Package	EPE Inside, Carton Outside
Specification	LPCB/UL/CE/ISO
Trademark	Asenware
Origin	Guangdong, China
HS Code	853110000
Production Capacity	10, 000PCS/Year

Product Description

Conventional User-Friendly Evacuation Fire Alarm Control Panel System
Model: AW-CFP2166-8

For more information, pls check our website: asenware.en.made-in-china.com
Description

1. AW-CFP2166-16 conventional fire alarm panel is designed based on EN54 part 2 & 4 standard.
2. Adopted modularized design, flexible extendable capacity.
3. Two-level control mode by a lock
4.27VDC power supply output.
5. FIRE PROTECTION, FIRE ROUTING and FAULT signal output, the output can be configured to dry relay type or wet sources type.
6.2 channel general sounders output.
7. Each zone has 1 circuit detectors input.
8. Each zone can be disable by a button.
9. It has RESET button to reset the panel.
10. SILENCE button to stop BUZZER and SOUNDERS.
11. EVACUATE button to start a manual fire alarm immediately.
12. TEST button to test all LEDs orderly.
13. Low-battery protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.
14. Optional GSM module is available for fire alarm by SMS.

Conventional User-Friendly Evacuation Fire Alarm Control Panel System

Features

1. Panel is designed based on EN54 part 2 &4 standard
2. It is modularized design, the panel can expand from 1 zone to 32 zone easily
3. It has 2 level control mode by a lock, 24VDC power supply output, 2 general sounders output
4. Eache zone has 1circuit detectors input and can be disable by a button
5. It has FIRE and FAULT signal output, RESET button to reset the panel, SILENCE button to stop BUZZER
and SOUNDERS, EVACUATE button to start a manual fire alarm immediately
6. It has an optional GSM module for fire alarm by SMS
7. It is economic, user-friendly and easy maintenance

Parameters

ITEM	1Zone panel	2Zone panel	4-8 Zone panel	12-32 Zone panel
Model No.	AW-CFP2166-01	AW-CFP2166-02	AW-CFP2166-04-8	AW-CFP2166-12-32
Power specification
Mains supply voltage	110VAC or 240VAC
Internal power supply	27.2VDC
Total output current limited	500mA @ 240VAC	500mA @ 240VAC	3A @ 240VAC	3A @ 240VAC
Main supply monitor for fault	Yes
Battery protection for low voltage	Yes
Batteries (default configuration)	12V2AH*2
Detector circuit specification
Number of circuit	1	2	4-16	4-32
Line fault monitor for open circuit	Yes
Line fault monitor for short circuit	Yes
Line fault monitor for detector removal	Yes, if End of Line Monitor Unit fitted in place of End of Line Resistor
End of Line device	6.8k Ω,5% tolerance, 0.25W (colour code-blue,grey,red,gold)
Detector continuity diodes	Silicon 1N4001 or Schottky type (required if End of Line Monitor Unit fitted to give Detector Removal Fault)
Call point resistor value	470 to 680 Ω, 0.225 or 0.5 watt
Maximum number of smoke/heat detectors per zone	20 (based on a total detector current of 2mA, each detector consuming 100μA).Note: if End of Line Monitor Unit is fitted, for correct operation maxmum voltage drop must not exceed 12 volts.
Maximum number of manual call points per zone	No limit
Sounder circuit specification
Number of general circuits	2
End of line resistor value	6.8k Ω,5% tolerance, 0.25W (colour code-blue,grey,red,gold)
Line fault monitor for open circuit	Yes
Line fault monitor for short circuit	Yes
Outputs fused AT	400mA
Maximum number of bells @ 20mA of each sounder output	20
Fuses
Battery fuse	1.5A F 20mm
Sounder outputs	500mA F 20mm
Fire and fault output
Output type	NC and NO relay
Maximum current	100mA
Connection block
Largest acceptable conductor size	2.5mm2
Smallest acceptable conductor size	0.75mm2
Size and weight
Dimensions(mm)	27220070mm	32023190mm	395X502X124	362X565X124
Weight (without batteries)	4kg	5kg	7kg	8kg
Weight (with batteries)	5.8kg	6.8kg	9.6kg	12.5kg

Company Information

Asenware,manufacturer of fire alarm and fire suppression system since 2005.
Our headquarter is in London, UK, with factory Shenzhen, China.

We keep our best service for our customers, and have a rich experienced engineer team to design and install
for overseas project.

Product range

Addressable fire alarm system
Conventional fire alarm system (2166 series)
FM200 gas suppression system (2159 series)
Fire pump
Fire hose/ hose reel and cabinet
ABC powder/ CO2 fire extinguisher
Emergency light system

Conventional User-Friendly Evacuation Fire Alarm Control Panel System

Name Card

Products

Conventional User-Friendly Evacuation Fire Alarm Control Panel System

Basic Info

Product Description