Mutilzone Fire Evacuation Fire Alarm Conroller Fire System

Basic Info

Model NO.	AW-CFP2166
Product Name	Mutilzone Fire Evacuation Fire Alarm Conroller
Zones	1-32
Power Supply	110VAC/240VAC
Battery	12V2ah*2
Fire Relay Output	Nc and No
Fault Relay Output	Nc and No
Sounder Output	2 Circuits
Warranty	12months
Zone/Detector	Maximumly Supports 20PCS
OEM & ODM Service	Available
Transport Package	EPE Inside, Carton Outside
Specification	CE, iso
Trademark	Asenware
Origin	Guangdong, China
HS Code	853110000
Production Capacity	10000PCS/Year

Product Description

Mutilzone Fire Evacuation Fire Alarm Conroller
Introductions:1. AW-CFP2166-2 conventional fire alarm panel is designed based on EN54 part 2 & 4 standard.2. Adopted modularized design, flexible extendable capacity.3. Two-level control mode by a lock4.27VDC power supply output.5. FIRE PROTECTION, FIRE ROUTING and FAULT signal output, the output can be configured to dry relay type or wet sources type.6.2 channel general sounders output.7. Each zone has 1 circuit detectors input.8. Each zone can be disable by a button.9. It has RESET button to reset the panel.10. SILENCE button to stop BUZZER and SOUNDERS.11. EVACUATE button to start a manual fire alarm immediately.12. TEST button to test all LEDs orderly.13. Low-battery protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.14. Optional GSM module is available for fire alarm by SMS.Freeman ZhouGSM: 008613922805315Asenware, professional fire alarm solution provider.

ITEM	1Zone panel	2Zone panel	4-8 Zone panel	12-32 Zone panel
Model No.	AW-CFP2166-01	AW-CFP2166-02	AW-CFP2166-04-8	AW-CFP2166-12-32
Power specification
Mains supply voltage	110VAC or 240VAC
Internal power supply	27.2VDC
Total output current limited	500mA @ 240VAC	500mA @ 240VAC	3A @ 240VAC	3A @ 240VAC
Main supply monitor for fault	Yes
Battery protection for low voltage	Yes
Batteries (default configuration)	12V2AH*2
Detector circuit specification
Number of circuit	1	2	4-16	4-32
Line fault monitor for open circuit	Yes
Line fault monitor for short circuit	Yes
Line fault monitor for detector removal	Yes, if End of Line Monitor Unit fitted in place of End of Line Resistor
End of Line device	6.8k Ω,5% tolerance, 0.25W (colour code-blue,grey,red,gold)
Detector continuity diodes	Silicon 1N4001 or Schottky type (required if End of Line Monitor Unit fitted to give Detector Removal Fault)
Call point resistor value	470 to 680 Ω, 0.225 or 0.5 watt
Maximum number of smoke/heat detectors per zone	20 (based on a total detector current of 2mA, each detector consuming 100μA).Note: if End of Line Monitor Unit is fitted, for correct operation maxmum voltage drop must not exceed 12 volts.
Maximum number of manual call points per zone	No limit
Sounder circuit specification
Number of general circuits	2
End of line resistor value	6.8k Ω,5% tolerance, 0.25W (colour code-blue,grey,red,gold)
Line fault monitor for open circuit	Yes
Line fault monitor for short circuit	Yes
Outputs fused AT	400mA
Maximum number of bells @ 20mA of each sounder output	20
Fuses
Battery fuse	1.5A F 20mm
Sounder outputs	500mA F 20mm
Fire and fault output
Output type	NC and NO relay
Maximum current	100mA
Connection block
Largest acceptable conductor size	2.5mm2
Smallest acceptable conductor size	0.75mm2
Size and weight
Dimensions(mm)	27220070mm	32023190mm	395X502X124	362X565X124
Weight (without batteries)	4kg	5kg	7kg	8kg
Weight (with batteries)	5.8kg	6.8kg	9.6kg	12.5kg

Products

Mutilzone Fire Evacuation Fire Alarm Conroller Fire System

Basic Info

Product Description